Results 1 to 8 of 8
Daft Punk Jacket Logo/Cone Studs?5th Feb 2012, 19:01 #1
Was wondering if anyone had a larger or slightly larger logo layout like this one. :
That was the biggest I could find, but it would be really helpful if someone had a slightly larger one. I tried searching through old forums, but most of the links were dead.
Also, as far the cone studs go... has anyone had any good experiences with a specific brand or are the all pretty much just the same?
And as for the color of the studs, are they chrome? Or like a bronze-ish type color?
I've seen pictures where they look chrome in one picture, and then bronze-ish in another picture. But I'm guessing it's just really due to the lighting.
Here's what I mean. :
Any help would be greatly appreciated.
Last edited by DaTBoYFrOMTeXaS; 5th Feb 2012 at 19:03.
Re: Daft Punk Jacket Logo/Cone Studs?5th Feb 2012, 20:04 #2
I always thought the logo on the jacket was like this one:
It's a little different but I'm sure that's the one.
As for the studs, I used to think they were a red-ish color due to the pictures, and I did a test on a jacket using some simple self adhesive rhinestones. They look fine, but I think it's just the lighting in those photos that makes them look red/bronze. The real color seems to be chrome, but that's just my opinion.
Re: Daft Punk Jacket Logo/Cone Studs?5th Feb 2012, 21:33 #3
zer0gs pattern looks more accurate.
Here's a larger picture from Electroma where you can clearly see all the studs.
I turned it into a black and white pattern:
The important thing is that the pattern is correct, then you should be able to print it in different sizes regardless of the image's original size by placing it inside a Word-document, for example.
Last edited by Ridley; 5th Feb 2012 at 21:42.
Re: Daft Punk Jacket Logo/Cone Studs?5th Feb 2012, 21:56 #4
Huge thanks for all your help zer0g and Ridley.
Yeah I was going to make it bigger, but I wasn't sure if there was already an existing picture somewhere floating around the net that had come close to the original logo in measurements somehow, or if expanding the picture would make the gaps between each stud appear too spread out once I've finished it.
I'll just have to play around with it, I guess.
But again, thanks for all your help guys! Answered all my questions. Will be using the pics provided.
Last edited by DaTBoYFrOMTeXaS; 5th Feb 2012 at 21:59.
Re: Daft Punk Jacket Logo/Cone Studs?9th Feb 2012, 22:45 #5
I recommend these, it's what I am using for my jacket and pants. Build pics of that won't come till later in the year. Best of luck man!Remember, only Imperial Stormtroopers are so precise... and many Bothans died to bring you this post! www.facebook.com/9336industries
Re: Daft Punk Jacket Logo/Cone Studs?5th Apr 2012, 18:18 #7
I'm going to be using these for my jacket too, did you use a bedazzler or just push them in yourself? also how exactly did you place them? did you punch a smaller hole through where you wanted to place the stud and then put it through? ahhh soo many questions lol
"We are just Human....After all"
Re: Daft Punk Jacket Logo/Cone Studs?5th Apr 2012, 21:37 #8
you can use a bedazzler or do it by hand if you prefer.
just punch out the design on the paper, lay it where you need, dab each hole with a silver sharpie, remove once finished, and just set the stud where the dots appear on the back and either punch it in or bedazzle it.
By aavlee in forum Fan-madeReplies: 69Last Post: 4th Jan 2012, 22:18
By Topgun in forum Fan-madeReplies: 0Last Post: 7th Jul 2011, 06:36
By Daftlove90 in forum Fan-madeReplies: 1Last Post: 16th Jul 2010, 08:00