Daft Punk Helmet Kits. All Versions Freshly Molded. LIMITED RUN

[Sorenzo]

I have been working on a series of Daft Punk commissions of late and as a result I have re-prepped and re-molded all of my helmet molds.

All the masters were buffed to a mirror finish and re-molded with Smooth-On Mold Max 40 and are pulling damn near perfect casts. I have pulled a couple of hundred casts from these 3 molds, I'm excited to be pulling from fresh molds again.

I am offering you fine lot some tasty discounts for a limited time only. I plan on pulling 15 -20 casts over the next few weeks at this reduced rate to help re-coop some of the costs incurred and to fund a new sculpt which I am currently working on (more on that later)

I currently have 4 'versions' of these iconic helmets available. Here are some images of helmets I have personally finished and how they might look once you have finished them





Thomas Bangalter - This is the newer Tron Legacy / Random Access Memories. The main difference with this lid is the ear pucks, I have one master for the helmet but 2 different versions of the ear pucks. The geometry of the helmet has changed slightly from the first but I felt having 3 helmet sculpts was more than enough at the time.




Guy-Manuel de Homem-Christo- This is the newer Tron Legacy / Random Access Memories.




Thomas Bangalter - This is the same sculpt but with different ear pucks, they a have flat section and clear cut lines so to insert LED disks.




Guy-Manuel de Homem-Christo- This is the newer Human After All / Electroma version. My personal favourite. This sculpt also includes built in holes in the chin section to install fans, much like those in the RAM version. It can get quite warm in these things, and I've had ambitions to install a full LED rig in one, so it made sense to have fans as a built in feature. Of course, you can always cut them away if you wish o keep them screen accurate.

FULL GALLERY OF FINISHED HELMETS CAN BEEN SEEN HERE.



All my casting are made with Smooth-Cast Onynx, so they are heat resistant to help with any chroming processing. They are slush cast by me personally, all by hand. Each helmet uses between 1.2Kg - 1.5Kg depending on the version. The visors are vacuum of laser cut from 2mm Pet-G. I have a gallery of images here. Please note, these images have not been updated in a few years, they aren't the best quality and some are cast with a white resin. I plan on updating these pictures once I get a few pulls.

Also available are the RAM era hand plates, I have 'Large' versions and now a 'Small' version which was made for a female client.
The HIPS can be vacuum metalised with no prep, they just need trimmed and mounted.








Now for the business part.
I will be selling each helmet kit for £125 GPB + shipping costs. It will be an extra £25 to had a hand plate kit to an order.

Anybody wanting 2 kits can have free shipping on the 2nd kit, as an added bonus.

Shipping Costs

UK - £20
EU - £30
USA - £40
Rest of the World - Ask for a quote



To make it easy for you all, those stateside should be paying approx $200 USD for a delivered kit and anyone who deals in EUROs will be looking at around 170 EUR

I may continue the run if I exceed this number, but I may need to adjust the price, depending on my schedule/workload.

If you are interested just leave a comment and I'll start a list. My aim is to be putting these out pretty fast as I don't have room to store them, so I'll be doing shipping runs twice, maybe 3 times a week. Payment secures your order, Payments through PayPal.

Any questions feel free to ask.

[ResonanceWave]

Are you still offering these kits? If so I would absolutely be interested.

[Sorenzo]

Are you still offering these kits? If so I would absolutely be interested.

Yes indeed, I have responded to your email.

[JayT]

Are you still offering these bathmate xtreme kits? If so I would absolutely be interested.

Those are some nice helmets.

[Daft the Kid]

May I know how long this offer will be and maybe more pics of the Thomas Helmet from different angles?
Really cool btw!

[giulyprod]

Fantastic work ! How can I contact you for the gloves ?

[Sorenzo]

Willing to do another couple of kits at this price. email sorenzoprops@gmail.com is probably the quickest way to communicate, be sure to mention this forum.

[Slaen]

Very nice work

[something awesome]

These are absolutely beautiful.

[VincentBlakely]

Are you still offering these kits? If so I would absolutely be interested.

I also want one of these kits because I am interested in them.